Extra settings for Nod32 v2.7 - revised 22-12-2006

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

TOTALLY SILENT SCAN


This scan can be very useful on a multi-user computer where a person/persons are prone to closing/stopping visibly run scans.


THIS SCAN CAN NOT BE STOPPED.


1. Click on “Schedular/Planner”.

2. Click on “Add”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. In the dropdown box, choose “NOD32 – On demand scanner - Scanning”.

2. Click on “Next”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Choose a name for your task.

2. Choose a Radio Button that suits your needs.

3. Click on “Next”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Choose a time to run your task.

2. Place a tick in a day or days that you want to run your task.

3. Click on “Next”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Choose a Radio Button that suits your requirements.

2. This will prevent overlaps of a Scheduled Task if you choose the Radio Button in the screenshot.

3. Click on “Next”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Click on “Finish”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. In the dropdown box, choose “Control Centre Profile”.

2. Click on “OK”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Remain in the Schedular/Planner module.

2. Right Click on your new scheduled scan this will pop up a small window as seen in the screenshot.

2. Click on “Run now”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Click on “Logs”.

2. Click on “NOD32 Scanner Logs”.

3. If your settings are correct you will see “Cleaning” as the scan starts.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. If an infiltration (Virus, Trojan etc) is found, at the end of the scan you will see a popup window.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

To view details of a scan go to the Control Centre> Logs> NOD32 Scanner Logs.

1. You will see the scan has “Completed”.

2. In this case an infection was detected (as per popup window in previous screenshot).


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Right click on the log that you would like to view, select and click on “Details”.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Draw the slider down to see the results and locate the infection.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Having drawn the slider down you can see the infection displayed in a different color to the rest of the details logged.

2. The Infection.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

ENTERING YOUR USERNAME and PASSWORD


You will receive your Username and Password by email from a NOD32 Reseller, NOD32 Distributor or from ESET themselves; this is totally dependent upon how you purchased your license for NOD32.

Do NOT try to use a Username and Password that you have created, ONLY a Username and Password provided by ESET will work.

The following instructions are for using the Username and Password provided by ESET to download NOD32 from the internet, as well as for entering each into the "NOD32 Control Centre".



Entering a Username and/or Password into a POPUP BOX that advises of an incorrect Username or Password will FAIL to be remembered.

There is ONLY one area to enter such information, and that is the NOD32 Control Centre> Update> Setup area.



If you receive a notice about your settings being "Password Protected", you will need to address this FIRST or you will NOT be able to enter a Username and Password. See HERE for further information on addressing this.



1. Your Username and Password will look like this screenshot.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

The next step is the tricky part, you need to be VERY precise when "highlighting" your Username and then Password.


Please do NOT try to "type" in your Username and Password, as most people will fail; this is because certain letters and numbers are easily mixed up.


As an example only this Password: 01oliwvvx0 could be entered as:

o as in oscar
l as in lima
0 as in the number
1 as in the number
l as in lima
w as in whiskey
w as in whiskey
x as in x-ray
o as in oscar

and this is only but one of many many combinations that could be made up for this particular password, all would be incorrect, the only password that would be accepted is the correct password:

0 as in the number
1 as in the number
o as in oscar
l as in lima
i as in india
w as in whiskey
v as in victor
v as in victor
x as in x-ray
0 as in the number

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Click next to the last number in your "Username" and while holding down your left click button, drag the curser to the beginning of your Username, to the left side of the "A".

2. This is VERY important, as per the screenshot, MAKE SURE there isn't a "SPACE" preceding or after your Username when you have it highlighted. This is because your Username is 10 characters long (12 if it is a EAV license), if there is a space it becomes 11 characters long, and then it is wrong.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

When your Username is highlighted.

1. Right click on the highlight and then left click on "Copy".

ALTERNATIVELY hold down the "Control" key on your keyboard and then at the same time, press "C" on your keyboard. This will copy what you have highlighted into the computers memory.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

Now open up the NOD32 Control Centre by clicking on Start> All Programs> Eset> NOD32 Control Centre or the NOD32 download page if you are downloading a fresh copy of NOD32.

1. Click on "Update".

2. Click on "Setup".


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Click in the "User name [case sensitive]:" box and make sure it is blank/empty.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. Right click in the blank box and then left click on "Paste".

ALTERNATIVELY hold down the "Control" key on your keyboard and at the same time, press "V" on your keyboard.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

1. You will now see that your Username has been pasted into the correct area.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

Repeat the exact same steps that you have just completed above for your "Password".



1. Click next to the last character in your "Password" and while holding down your left click button, drag the curser to the beginning of your Password, to the left side of the first "Character".

2. This is VERY important, as per the original screenshot, MAKE SURE there isn't a "SPACE" preceding or after your Password when it has been highlighted. This is because your Password is 10 characters long, if there is a space it becomes 11 characters long, and then it is wrong.

When your Password is highlighted.

3. Right click on the highlight and then left click on "Copy".

ALTERNATIVELY hold down the "Control" key on your keyboard and at the same time press "C" on your keyboard.

Now open up the NOD32 Control Centre by clicking on Start> All Programs> Eset> NOD32 Control Centre.

4. Click on "Update".

5. Click on "Setup".

6. Click in the "Password [case sensitive]:" box and make sure it is blank/empty.

7. Right click in the blank box and then left click on "Paste".

ALTERNATIVELY hold down the "Control" key on your keyboard and at the same time press "V" on your keyboard.

8. Click on "OK".




The last and final step is while you are connected to the Internet click on "Update Now"; this is to test that your Username and Password have been entered correctly.


.

 

Re: Extra settings for Nod32 v2.5 - revised 17-06-2005

WINSOCK REPAIR


Do NOT complete the following unless requested to do so.

or

If you find that your internet connection has been broken, please run Winsock XP Fix and then repair IMON; see post number 55 HERE

A word of warning; for those that have specific Network Settings for DHCP, a Host file and fixed IP address, this tool will reset all of these settings, so you will have to re-enter such settings after using the tool.



OR



Proceed with the following to delete the corrupted registry keys, and then reinstall the TCP/IP protocol.


Step 1. Delete the corrupted registry keys

1. Click Start, and then click Run.

2. In the Open box, type regedit, and then click OK.

3. In Registry Editor, locate the following keys, right-click each key, and then click Delete:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

4. When you are prompted to confirm the deletion, click Yes.

NOTE: Restart the computer after you delete the Winsock keys. Doing so causes the Windows XP operating system to create new shell entries for those two keys. If you do not restart the computer after you delete the Winsock keys, the next step does not work correctly.



Step 2. Install TCP/IP

1. Right-click the network connection, and then click Properties.

2. Click Install.

3. Click Protocol, and then click Add.

4. Click Have Disk.

5. Type C:\Windows\inf and then click OK.

6. On the list of available protocols, click Internet Protocol (TCP/IP), and then click OK.

7. Restart the computer.

8. Repair IMON; see post number 55 HERE

 

MESSENGER FILE TRANSFER SCAN SETTINGS


MSN Messenger / Windows Live Messenger files can be scanned upon transfer; please take the following steps:

1. Login to Messenger.

2. Click on Tools.

3. Click on Options.

4. Click on “File Transfer”.

5. Place a tick in “Scan files for viruses using:”.

6. Paste the following (including the quotation marks):

"C:\Program Files\Eset\nod32.exe" /selfcheck+ /list+ /scroll+ /quit+ /pattern+ /heur+ /scanfile+ /scanboot- /scanmbr- /scanmem- /arch+ /sfx+ /pack+ /mailbox- /adware /unsafe /ah /prompt /all

7. Click on “Apply”.

8. Click on “OK”.